A View from the Bridge Essay Example | Topics and Well Written Essays - 1750 words

A View from the Bridge - Essay Example The time setting, which is between 1940 and 1960, may not appeal to the interest of the present-day audience. But analytically speaking, the story contains more substance than many stories written by most contemporary writers. It connotes the favorability as well as the dangers one must experience and endure when living in a foreign land. [It] is a play largely concerned with discovery. As [Italian-American lawyer] Alfieri warns, no one can ever know what will be discovered. There are two secrets in the play: Eddie's incestuous desires for his niece and the two illegal immigrants hiding in the Carbone home, Marco and Rodolpho. [qtd. in Sparknotes, 18] The play, which is set to happen in an Italian-American community known as Red Hook, situated in the waterfront in Brooklyn, New York City, tells the story of Eddie Carbone, a longshoreman who feels something toward his niece other than filial love and how his life ends tragically because of it. Eddie Carbone - the center of the story - is a character who was created as an ordinary man; the type of person whom everyone will learn to love. However, Miller did not create a totally perfect character, but rather gave him flaws and weaknesses; his weakness is mainly concentrated in his love for his niece, Catherine. [] a suitable subject for a modern tragedy because the potential for self-destruction, which is in all of us, in Eddie's case has destroyed him. And apart from this improper love, Eddie is a good man; and this love has its origin in the quite proper love of father for child, and Eddie's sense of duty to his family and community. [A View from the Bridge] In a review of the play, another critic commented: Eddie sets in motion against one person rains a whole avalanche of destruction. Like many classic tragic figure (including Shakespeare's Hamlet), Eddie's effort to get rid of the one man he perceives as his enemy, cannot control fate's ripple effect on Marco, Marco's family and the hapless additional underground border - and, as importantly, his own standing in the tight-knit community. [Sommer] Despite Eddie's efforts to hide his feelings toward his niece, he is not able to do so, as shown in his actions. Although his wife Beatrice is aware of the fact of Eddie's non-paternal feelings toward her niece, she tries to ignore it and pretends that everything is just normal. Eddie's relationship with his wife and niece becomes more complex when he takes into the shelter of their home the two illegal immigrants, Marco and his brother Rodolpho, cousins of Eddie's wife Beatrice. Eddie's problem starts when one of the brothers, Rodolpho becomes romantically involved with his niece Catherine to whom Eddie harbors special feelings. Eddie tries everything in order to stop Rodolpho and Catherine from getting married, including seeking lawyer Alfieri's advice, making Catherine see Rodolpho's flaws and finally reporting the two brothers to the Immigration Bureau, an act which destroys Eddie's good reputation in the community. Eddie, however, is not able to stop the marriage from taking place. Embittered by hatred for Rodolpho and probably also driven by frustration, he refuses to reconcile with the younger man. In the end, Rodolpho becomes and American

Ancient Greek Theatre Essay Example for Free

Ancient Greek Theatre Essay The Greek theatre history begins with festivals which honor gods. An example of such a festival was ‘City Dionysia’ festival which honored god Dionysus. During this festival, which was taking place in Athens men perform songs to welcome god Dionysus. Plays were also presented. Athens was the main city where these festivals and theatrical traditions were presented. At ancient Greek Festivals, the actors, directors and dramatists were all the same person. Later only three actors were allowed to perform in each play. And this was followed by adding few non-speaking roles to perform on-stage. Because of the limited number of actors, the chorus played a very active part of Greek theater. During the chorus’ delivery of its lines music was often played. The theatrical forms of the ancient Greek theater were tragedy, comedy and satyr. Athenian tragedy, comedy and satyr plays were some of the earliest theatrical forms to emerge in the world. Greek theater and plays have had a lasting impact on Western drama and culture. Satyr plays dealt with mythological subject in comic manner. Tragedy had as an originator, Thespis, who is considered to be the first Greek actor of tragedy plays. Aristotle’s Poetics say that tragedy originates from dithyrambs which were songs sung in praise of Dionysus at the Dionysia each year. Sophocles, Euripides and Aeschylus were three well-known Greek tragedy playwrights. The structure of Greek tragedy consisted of the following: 1. Late point of attack 2. Violence and death offstage 3. Frequent use of messengers to relate information 4. Usually continuous time of action 5. Usually single place 6. Stories based on myth or history 7. Focus on psychological and ethical attributes of characters Comedy plays were derived from imitation. Aristophanes wrote most of the comedy plays. The structure of the comedy consisted of two parts. Part one had the prolog, where chous gives debate or ‘agon’ and parabasis, a choral ode addressing the audience, in which a social or political problem is discussed. Part two consists of scenes which show the result of the happy idea. Theatre buildings were called a theatron. They were large, open-air structures constructed on the slopes of hills. Most of the Greek theatres were constructed in such a way so that the smallest sound could be transmitted to any seat of the audience. They consisted of four main parts: the orchestra, the skene and the audience (theatron) and the parodos. The orchestra was a large area at the center part of the theatre normally circular. It was there where play, dance and acting took place. The earliest orchestras were simply made of hard earth but later in the Classical period some orchestras began to be made of marble and other materials. The orchestra of the theater of Dionysus in Athens was about 60 feet in diameter. The skene was a large building behind the orchestra which was used as a backstage. It was the place where actors change their costumes and masks. It was usually decorated as a palace, temple or other building, depending on the needs of the play. The audience (theatron) was where people were sitting to enjoy the play and it was in the front of the orchestra. It was usually part of hillside overlooking the orchestra. People in the fifth century BC probably sat on cushions or boards but by the fourth century many Greek theaters had marble seats. The parodos were the passageways by which the chorus and some actors made their entrances and exits. The audience also used them to enter and exit the theater before and after the performance. The two masks of the picture represent the symbols for theater. They represent the comedy and tragedy masks which were worn in ancient Greece. They also represent duality. Actors were very far away from the audience that without the aid of costumes and masks they would be difficult to see. Actors wore thick boots to add to their height and gloves to exaggerate their hanks so that their movements would be easy to see by the audience. The masks were made of linen or cork, so none have survived. We however know that they looked like from statues and paintings of ancient Greek actors. Tragic masks carried mournful or pained expressions, while comic masks were smiling. The head of the actor was covered by his mask, which included hair. It is believed that the shape of the mask amplified the actor’s voice, making his words easier for the audience to hear. This mask is associated with the famous ancient

Cost Effectiveness Analysis of Bleach

Cost Effectiveness Analysis of Bleach Household bleach is a common commodity used by all income groups of India. This is mainly because of hot and humid climatic condition which left us with no other choice than white or light colour daily wear clothes. To maintain personal hygiene and attractive look within the available budget it is necessary to use bleaches. One question which bothered me quite often was, when so many bleach brands are accessible, which one is the best to buy and this gave me the idea to frame my research question Investigating the cost-effectiveness of various brands of chlorine-based bleaches containing sodium hypochlorite accessible in Indian Market Thus to determine the usefulness and effectiveness of the bleaches, it was worth calculating the concentration of free chlorine per rupee (Indian currency) spent. The different bleaches were selected and the concentration of the free chlorine was calculated using iodometric titration. The cost per rupee was calculated and comparison was done using statistical tools. After necessary calculations and comparison, it was concluded that the most cost-effective bleach is local bleach. Local bleach has maximum concentration of free chlorine per rupee spent. Although the moles of free chlorine in local bleach is just 0.276mol/dm3 while in that of rin and robin are 0.68mol/dm3 and 0.588mol/dm3 respectively. But the local bleach is quite cheaper to other bleaches. It costs 30 rupees/dm3 while Robin costs 66 rupees/dm3 and Rin costs 80 rupees/dm3. The concentration of free chlorine per rupee spent on bleach is 0.0092mol/dm3 while that of Rin bleach and Robin bleach is 0.0085mol/dm3 and 0.0089mol/dm3. Thus, I conclude that Local Bleach brand is the most cost-effective brand among the three available in India. INTRODUCTION: 1.1 Background As climate of India is hot and humid, people prefer to dress in light or white colour cloth. To keep them clean is a necessity for hygiene. Hence it requires daily washing and using bleach as the light colour fabric expose the stains more easily. When used in approved quantity and right way, bleach removes the nasty stains from white color fabric and brings back the brightness. Looking into Indian economy, it is not possible to buy dresses in large number by masses . Thus easy way out is the use of bleaches. So when I started looking for a topic for my extended essay, my intensions were very clear. I was looking for an area for investigation which will help me to fulfill my requirement to do an essay for my diploma and give me the dual benefit to help my countrymen to choose a better and cost effective bleach which is affordable by them. I have collected the three bleaches which were having the maximum sale in the market , two were branded viz., Rin and Robin and one was a local brand usually purchased by lower income group people. Bleach is a chemical that removes colors or whitens, often via oxidation. Common chemical bleaches include household chlorine bleach, a solution of approximately 3-6% sodium hypochlorite (NaClO), and oxygen bleach, which contains hydrogen peroxide or a peroxide-releasing compound such as sodium perborate, sodium percarbonate, sodium persulfate, tetrasodium pyrophosphate, or urea peroxide together with catalysts and activators, e.g., tetraacetylethylenediamine and/or sodium nonanoyloxybenzenesulfonate.[1] There are other types of bleaches as well for example bleaches which hare used for the bleaching of wood pulp, fats and oils, cellulose, flour, textiles, bee wax, skin etc. the commonly used bleach for this purpose is chlorine dioxide and in a number of other industries. In the food industry, some organic peroxides(benzoyl peroxide,etc.) and other agents (e.g., bromates) are used as flour bleaching and maturing agents. Peracetic acid and ozone are used in the manufacture of paper products, especially newsprint and white Kraft paper.[2] But my investigation is related to household bleach used for removal of stains , which usually contain chlorine, though it often masquerades behind aliases such as sodium hypochlorite or hypochlorite.[3] Household bleach, used to whiten fabrics or remove mold from surfaces, is a 5% solution of a stabilized form of chlorine.[4] It is particularly effective on cotton fiber, which stains easily but bleaches well. Usually 50 to 250 ml of bleach per load is recommended for a standard-size washer. The properties of household bleach that make it effective for removing stains also result in cumulative damage to organic fibers such as cotton, and the useful lifespan of these materials will be shortened with regular bleaching. The sodium hydroxide (NaOH) that is also found in household bleach (as noted later) causes fiber degradation as well. It is not volatile, and residual amounts of NaOH not rinsed out will continue slowly degrading organic fibers in the presence of humidity. For these reasons, if stains are localized, spot treatments should be considered whenever possible. With safety precautions, post-treatment with weak organic acids such as acetic acid (vinegar) will neutralize the NaOH, and volatilize the chlorine from residual hypochlorite. Old t-shirts and cotton sheets that rip easily demonstrate the cost s of laundering with household bleach. Hot water increases the activity of the bleach, owing to the thermal decomposition of hypochlorite which ultimately generates environmentally-undesirable chlorate.[5] Color in most dyes and pigments are produced by molecules, such as beta carotene, which contain chromophores. Chemical bleaches work in one of two ways: An oxidizing bleach works by breaking the chemical bonds that make up the chromophore. This changes the molecule into a different substance that either does not contain a chromophore, or contains a chromophore that does not absorb visible light. Reducing bleach works by converting double bonds in the chromophore into single bonds. This eliminates the ability of the chromophore to absorb visible light.[6] The chlorine based bleaches are oxidized bleach. These bleaches have an edge over reducing bleaches because they act as disinfectant as well. The process of bleaching can be summarized in the following set of chemical reactions: Cl2(aq) + H2O(l) H+(aq) + Cl-(aq) + HClO(aq) The H+ ion of the hypochlorous acid then dissolves into solution, and so the final result is effectively: Cl2 (aq) + H2O (l) 2H+ (aq) + Cl-(aq) + ClO-(aq) Hypochlorite tends to decompose into chloride and a highly reactive form of oxygen: ClO- Cl- +1/2 O2 This oxygen then reacts with organic substances to produce bleaching or antiseptic effects.[7] To begin my investigation I gathered information about brands of chlorine based bleach, its uses and its contents. From the information collected I found out that sodium hypochlorite is an active ingredient in bleaches. Sodium hypochlorite is the magical ingredient which removes stains from the clothes. So if I find out which bleach has the more concentration of sodium hypochlorite and is cheaper than other bleaches will be considered as the best bleach for Indian people. This observation led to my precise topic selection that is Investigating the cost-effectiveness of various brands of chlorine-based bleaches containing sodium hypochlorite accessible in Indian Market After selection of topic next obvious step was to find various methods available in literature and select for an appropriate method for the estimation of the sodium hypochlorite in the bleaches. Various methods available are discussed in the methodology section of my essay. The one I have selected is based on the fact that it is easy to do and also gives a fair estimation of the concentration of hypochlorite in the available laboratory conditions. 1.2 Methods to judge the cost effectiveness of Bleach Some of the methods available in literature for the estimation of concentration of sodium hypochlorite are discussed below: Method 1: One of the common methods is to add excess hydrogen peroxide to a measured amount of bleach. This will result in the formation of oxygen gas. The volume of the gas is collected over water and measured. This is then used to calculate the concentration of sodium hypochlorite in a house hold bleach sample. A few commercial bleaches in their containers, with prices, can be placed on a suitable tray, each with a 10 cm3 syringe and 250 cm3 beaker, both labeled, into which small samples of the bleach can be placed. Measure 5 cm3 of each bleach into their side-arm flask for each experiment. Small samples of the hydrogen peroxide solution could be collected in a 100 cm3 beaker. Bleaches liberate toxic chlorine gas on contact with acids. The chemical reaction involved is H2O2(aq) + NaOCl(aq) à ¢Ã¢â‚¬  Ã¢â‚¬â„¢ H2O(l) + NaCl(aq) + O2(g) Direct comparison of volume of oxygen collected in the measuring cylinder can be used to compare the effectiveness of the bleach.[8] Method 2: Spectophotometric method has also been employed for the quantitative estimation of sodium hypochlorite in commercially available bleach solution. The method is based directly on the absorbance of hypochlorite in alkaline aqueous media. The other method takes advantage of the quantitative reaction of hypochlorite and ammonia in alkaline solution to form chloramine, which has a higher molar absorptivity.[9] Method 3: Another most common laboratory method is IODOMETRIC TITRATION. We can determine the OCl- ion content of a bleaching solution by reacting a known mass or volume of the solution with excess reducing agent, such as iodide ion (I-) in an acidic solution. OCl- (aq, colorless) + 2I-(aq, colorless) + 2H3O+(aq) -> I2(aq, brown) + Cl-(aq, colorless) + 3H2O(l) The reaction above proceeds to completion. Visible evidence of reaction is the change in the appearance of the solution from colorless to brown, due to the formation of iodine (I2). In the presence of excess I- ion, the amount of I2 formed is a measure of the amount of OCl- ion reacting. Then we determine the amount of I2 formed by titrating the I2 with a standard sodium thiosulfate solution (Na2S2O3). The titration reaction for this experiment is shown in the equation below. I2 (aq, brown) + 2 S2O3-2(aq, colorless) > 2I ­- + 2S4O3-2(aq, colorless) Thiosulfate ion is a reducing agent that reacts quantitatively with I2. The titration reaction is complete when the I2 formed from the reaction of OCl ­Ãƒâ€šÃ‚ ­- ion with I ­- ion is reconverted to I- ion by S2O3-2 ion. As the titration proceeds, the I2 concentration in the solution decreases. This causes the solution color to change from brown to pale yellow near the end of titration. The end point occurs when all the I2 has reacted and the solution is colorless. Because the change from yellow to colorless is not very distinct, establishing the end point of this final color change is difficult. We can make the end point more distinct by adding a small amount of starch solution to the titration mixture when the solution turns pale yellow. The unreacted I2 combines with the starch, forming a deep blue complex. The starch molecules tend to curl up into spirals and the hole formed is just the right size for the iodine molecules to fit in. Additional S2O3-2 ion reacts with the complex I2, causing a breakdown of the complex. Disappearance of the blue color signals the end point.[10] We can determine the concentration of OCl- ion in the solution. The moles of iodine in the solution are equal to moles of sodium hypochlorite. So then we can find out the concentration of OCl-. I have used the iodometric titration for my investigation because It is easy to carry it out in school laboratory conditions. Gas volume measurement often leads to more random errors in the measurements which ultimately affect the concentration calculations. Spectrophotometric methods are most reliable method but due to non availability of the instrument, I took the decision to stick to iodometric titration. 2. METHODOLOGY: 2.1 Hypothesis More the sodium thiosulfate used to titrate the solution more effective is the bleach at removing the stains. The bleach which has high concentration of sodium hypochlorite is better at removing stains then the bleach with less concentration of sodium hypochlorite. Based on Indian mentality, the expensive the bleach the better is it at removing the stains. The expensive brand should be more cost effective. 2.2 Selection of bleaches 3 different chlorine-based bleaches containing sodium hypochlorite which are easily available in Indian market. The first one is rin bleach which is thought to be the best bleach because it is expensive of all bleaches available in the market. It costs 40 Rs for 500 ml. The second bleach which I have taken is robin which costs 33 Rs for 500ml, a great competitor to RIN. And the third bleach which I have taken is bleach from a local brand which costs only 15Rs for 500ml. 2.3 Experiment 1 Make a soya bean solution using 17 grams of soyabean and dissolved up to 100 cm3 mark. Put three drops of the solution on a piece of cloth and using a syringe the amount of bleach required to remove the stain should be noted down. 2.4 Experiment 2 As told earlier I will be using titration with sodium thiosulfate for calculating the concentration of sodium thiosulfate in the bleaches. The method involves two main steps. Step 1: Standardizing the solution of sodium thiosulfate solution As sodium thiosulfate is not a primary standard, so it was standardized using a known concentration of potassium iodate KIO3 and the exact concentration of sodium thiosulfate was calculated. Approximately 8.00 ±0.01 grams of sodium thiosulfate (Na2S2O3 5H2O) was taken a 100 cm3 beaker and dissolved by adding small amount of double distilled water. It was stirred using a glass rod till it was completely dissolved. Solution was transferred to 250 cm3 of standard flask carefully using a funnel. Solution was made up to the mark and mixed well by tilting the flask three times. A solution of potassium iodate, KIO3 (0.2 Mole/dm3) was prepared by dissolving 10.7 ±0.01 grams of KIO3 in 100 cm3 beaker and dissolving it in minimum amount of water and making the solution in 250 cm3 standard flask. Further 25.0 ±0.06 cm3 of KIO3 solution is pipette out using a 25.0 ±0.06 cm3 pipette and a pipette filler and poured in standard measuring flask and solution was made 250 cm3 using distilled water. Preparation of 1 mol/dm3 of sulfuric acid Take 55cm3 of 98% pure sulphuric acid in 100cm3 measuring flask. Now slowly pour this acid into 500cm3 of constantly stirred water in a beaker Now transfer this solution into 1dm3 conical flask and add water till the 1dm3 mark. Preparation of 10% potassium iodide Take 10grams of potassium iodide Dissolve it in 100cm3 solution Preparation of 2%starch indicator Take 2grams of starch Add little bit of cold water until a smooth paste is obtained Add 100cm3 of boiling water and stir Heat the solution until the solution is clear 25.0 ±0.06 cm3 of KIO3 solution is pipette out using a 25.0 ±0.06 cm3 pipette and a pipette filler and poured in conical flask. 10.00 ±0.05 cm3 of potassium iodide (10% w/v) is added to the flask using a measuring cylinder. To this solution 10 .00 ±0.05 cm3 of sulfuric acid (1 mol/dm3) is added to the flask using another measuring cylinder. Sodium thiosulfate is filled in 50.00 ±0.05 cm3 burette and added to the conical flask containing KIO3, KI and H2SO4solution till the solution in the conical flask turned pale yellow. 2 to 3 drops of starch solution (1% w/v) was added to the conical flask. The solution turned blue black. More sodium thiosulfate was added to the conical flask with constant swirling till the solution turned colorless. The final volume of thiosulfate solution added is recorded Three concordant readings are taken to have consistency in the recorded data Step 2: Titration of the different brands of bleaches using standardized solution of sodium thiosulfate. Thus calculating the concentration of sodium hypochlorite present in different brands of bleaches. Procedure: I have taken 25.0 ±0.06cm3 of Rin bleach using a pipette and pipette filler into 250cm3 graduated flask. To this water was added to make the solution up to 250cm3 mark. 25.0 ±0.06cm3 of the solution poured with the help of pipette into a conical flask and the same procedure as given above was repeated with RIN bleach followed by the other two bleaches, Robin and local brand. 3. Data collection and processing: 3.1 Finding out the concentration of Sodium Thiosulfate Standardization of sodium thiosulfate: Volume of potassium iodate taken in conical flask = 25.0 ±0.06 cm3 final burette reading / cm3 ±0.05cm3 20.10 19.90 20.00 initial burette reading / cm3 ±0.05cm3 0.00 0.00 0.00 volume of sodium thiosulfate used / cm3 ±0.1cm3 20.10 19.90 20.00 Average volume of sodium thiosulfate used = 20.00 cm3 Calculations: 25.0 cm3 of KIO3 solution required 20.00 cm3 of Sodium thiosulfate. The ionic equation related to the titration is IO3-1 + 5I-1 + 6H+  ® 3I2 + 3H2O The I2 produced by the reaction between iodate ion and iodide ion is related stoichiometrically to thiosulfate ion as follows I2 + 2S2O32-  ® S4O62- + 2I-1 Moles of KIO3 (0.1 Mol/dm3) in diluted solution = 0.01 mol/dm3 Moles of 0.01 mol/dm3 KIO3 in 25 cm3 of solution = 0.01 x 25 x 10-3 = 0.25 x10-3 Ratio of moles of KIO3: I2 1 : 5 So moles of I2 in solution = 5 x 1 x 0.25 x10-3 = 1.25 x10-3 Ratio of moles of I2 : S2O32- 1 : 2 Therefore moles of thiosulfate = 2 x 1 x 1.25 x10-3 = 2.50 x 10-3 20.00 cm3 of thiosulfate solution has 2.50 x 10-3 moles Therefore the concentration of thiosulfate solution = 2.50 x 10-3 x 103/20.00 = 0.125 mol/dm3 3.2 collection T value for the t- test between RIN and ROBIN is 36.83644 This value is a lot higher than the cut off value (2.31. using degrees of freedom= [n1-1] + [n2-1] = 8) at a 5% significance level. This implies that there is lot lesser than .1% chance that the 2sets of readings belong to one population or the difference is just difference is insignificant. 3.3 Calculation 25.0 cm3 of diluted Rin brand bleach solution required 27.8 cm3 of Sodium thiosulfate. Moles of sodium thiosulphate= Moles of iodine, I2, were present in the conical flask after the bleach reacted with an excess of iodide ions 2S2O32-(aq) + I2(aq) S4O62-(aq) + 2I-(aq) Moles of I2 = moles of sodium thiosulphate à · 2 Moles of I2 = 0.00348 à · 2 Moles of I2 = 0.0017 moles 1 mol of iodine is displaced by 1 mol of free chlorine. Cl 2(aq) + 2I-(aq) 2Cl-(aq) + I2 (aq) The free chlorine concentration, in mol dm-3, of the bleach RIN 1 mole iodine = 1 mole of free chlorine à ¢Ã‹â€ Ã‚ ´25cm3 of diluted bleach solution contains 0.0017 moles of chlorine Therefore the undiluted bleach solution of 25 cm3 would contain .017 moles Concentration of iodine in 500 cm3 of RIN bleach solution is Therefore the concentration is 0.34mol/500cm3 of RIN bleach. Therefore the concentration is 0.68mol/dm3. 25.0 cm3 of diluted Robin brand bleach solution required 23.53 cm3 of Sodium thiosulfate. Moles of sodium thiosulphate= Moles of iodine, I2, were present in the conical flask after the bleach reacted with an excess of iodide ions 2S2O32-(aq) + I2(aq) S4O62-(aq) + 2I-(aq) Moles of I2 = moles of sodium thiosulphate à · 2 Moles of I2 = 0.00294 à · 2 Moles of I2 = 0.00147 moles 1 mol of iodine is displaced by 1 mol of free chlorine. Cl 2(aq) + 2I-(aq) 2Cl-(aq) + I2 (aq) The free chlorine concentration, in mol dm-3, of the bleach RIN 1 mole iodine = 1 mole of free chlorine à ¢Ã‹â€ Ã‚ ´25cm3 of dilute bleach solution contains 0.00147 moles of chlorine Concentration of iodine in 500 cm3 of Robin bleach solution is Therefore the concentration is 0.294 mol/500cm3 of Robin bleach. Therefore the concentration is 0.588mol/dm3. 25.0 cm3 of diluted LOCAL brand bleach solution required 11.07 cm3 of Sodium thiosulfate. Moles of sodium thiosulphate= Moles of iodine, I2, were present in the conical flask after the bleach reacted with an excess of iodide ions 2S2O32-(aq) + I2(aq) S4O62-(aq) + 2I-(aq) Moles of I2 = moles of sodium thiosulphate à · 2 Moles of I2 = à · 2 Moles of I2 = 0.00069 moles 1 mol of iodine is displaced by 1 mol of free chlorine. Cl 2(aq) + 2I-(aq) 2Cl-(aq) + I2 (aq) The free chlorine concentration, in mol dm-3, of the bleach RIN 1 mole iodine = 1 mole of free chlorine à ¢Ã‹â€ Ã‚ ´25cm3 of diluted bleach solution contains 0.00069 moles of chlorine Concentration of iodine in 500 cm3 of Local bleach solution is Therefore the concentration is 0.138mol/500cm3 of RIN bleach. Therefore the concentration is 0.276mol/dm3. 3.4 analysis and interpretation Calculating the cost-effectiveness BRAND RIN ROBIN LOCAL Concentration of free chlorine (mol/dm3) 0.68 0.588 0.276 Price of 500cm3 bleach in rupees 40 33 15 Price of 1dm3 bleach (=price of 500cm3ÃÆ'-2) in rupees 80 66 30 Concentration of free chlorine per rupee spent on bleach (=concentration of free chlorine in 1dm3 bleach/price of 1 dm3 bleach) 0.0085 0.0089 0.0092 Matrix 1 It can be seen from the experiment 1 higher amounts of bleach is used to remove the stain as we move from RIN to ROBIN to the local brand. And as it can also be seen from the histogram above (graph 1) that the free chlorine concentration decreases as we move from RIN to ROBIN to the local brand it can be inferred that higher the concentration lesser is the amount of bleach required. How so ever the amount of free chlorine required is nearly the same 4. Conclusion: 4.1 Results The free chlorine concentration per rupee spent is maximum of local brand bleach. Therefore the local bleach is most cost-effective bleach. The local brand bleach over takes other branded bleaches like RIN and Robin which are very famous in Indian market. There is a very small difference between each of them when we calculate the concentration of free chlorine per rupee spent. But when we see the concentration of free chlorine in rin and robin they are quite higher then local brand. Local brand has very less moles of sodium hypochlorite per dm3 of the bleach. So the volume required to remove a stain by local brand bleach would be quite large then the volume required of rin or robin brand bleach. This can give a wrong impression that the other brands are better or more efficient at removing stain. But we know that it isnt so. Only if higher amounts of the local brands were used the same stain would take lesser money to be removed. This proves the Indian mentality. Resolved questions Is the amount of sodium thiosulfate used proportional to the amount of free chlorine atoms- Yes very much. It can be inferred by comparing graph 1 (or matrix 1) and graph 2 Does the concentration of sodium hypochlorite affect the effectiveness of the bleach- Higher the concentration of sodium hypochlorite more is the effectiveness of the bleach. Inferred from graph 1 (or matrix 1) and table 1 Checking the Indian mentality- It depends on the amount of bleach used. But it can easily be inferred that the local brand is a lot more cost efficient Deriving the cost effectiveness of different brands of bleach Hypothesis 1 and 2 were confirmed to be true via experimentation while the other two hypotheses (namely 3 and 4) are proved to be wrong. Evaluation Weaknesses It isnt very easy to note down the point of the end of the titration. Accuracy can tend to pose a problem The distil water can have other salts present Improvements Colorimetry should be used for knowing the end point More accurate burettes can be used Ultra pure water should be used rather than distilled water 4.2 Extension The other method should be used. A more number of brands should be used. Other active ingredients should be tested for. Biologically active organisms like bacterias should also be considered. The activity of the other active substances should be tested. 5. BIBLOGRAPHY: http://en.wikipedia.org/wiki/Bleach http://www.ozonesolutions.com/Ozone_Color_Removal.html http://www.care2.com/grrenliving/chlorine-in-household-cleaners.html# http://dhs.wi.gov/eh/ChemFS/fs/chlorine.htm http://en.wikipedia.org/wiki/Sodium_hypochlorite Field, Simon Q (2006). Ingredients Bleach. Science Toys. http://sci-toys.com/ingredients/bleach.html. Retrieved 2006-03-02. http://en.wikipedia.org/wiki/Bleach http://www.practicalchemistry.org/experiments/estimation-of-the-concentration-of-household-bleach,253,EX.html Journal of pharmaceutical sciences, volume 59, issue 8, pages 1168, 1170 www.cerlabs.com/experiments/10875404162.pdf Other Sources Referred: Advanced Subsidiary Level and Advanced Level May/June 2006 paper http://science.jrank.org/pages/6243/Sodium-Hypochlorite.html http://www.howstuffworks.com/question189.htm http://www.factsaboutbleach.com/ Handbook of detergents, Volume 5 By Uri Tsoler, Guy Broze. Pages 621-627

Plato’s Influence on Western Civilization Essay -- Greek Metaphysics,

Our country is built on a set of values derived from ancient civilizations, individuals, and city-states; both negative and positive attributes of these relics can be proven to have assisted in molding our government into a unique and prized entity. Never would one imagine that western civilization is actually inclined by theories of truth and the human beings perception of it. Few would have thought that a primitive concept could be linked to the setbacks of other societies and their forms of socialization, as well as to the success to ours. The basic concept of truth and our natural response to socialization developed an ideal image of our current day country, long before our country existed. In ancient Greece, a great philosopher named Plato founded one of the most famous schools in all of history. Plato was a student of an enlightened man and a teacher of many others. Plato’s contribution to our existing government is given little credit, yet thanks to him we function as o ne of the most sophisticated societies in the entire history and the world. Plato, whose real name was Aristocles, was believed to have been born the year 427 BCE in Athens, Greece. He was born into a wealthy, Athenian aristocratic family, who actually came to rule Athens in 404 BCE. Because of his family’s prosperous background, Plato was treated to fine education. Plato’s upbringing ultimately influenced his viewpoints on particular subjects pertaining to philosophy and politics, a majority of his thoughts were pulled from two chief occurrences in his life; the Spartans victory over Athens in the Peloponnesian War, and the teachings, as well as the execution, of Socrates. The Peloponnesian War began before Plato’s birth, yet didn’t end until he was abo... ...Web. 25 Nov. 2013. . Patten, Joseph, and Kevin Dooley. "Ancient Political Theory." Why Politics Matters: An Introduction to Political Science. Belmont, CA: Wadsworth Co, 2011. 35-47. Print. "Politics." Merriam-Webster. Merriam-Webster, n.d. Web. 02 Dec. 2013. . "Thomas R. Martin, An Overview of Classical Greek History from Mycenae to Alexander." Thomas R. Martin, An Overview of Classical Greek History from Mycenae to Alexander,New Directions in Philosophy and Education, Plato's Academy. The Annenberg CPB/Project, n.d. Web. 27 Nov. 2013. . Thornton, Bruce S. Greek Ways: How the Greeks Created Western Civilization. San Francisco: Encounter, 2000. Print. Plato’s Influence on Western Civilization Essay -- Greek Metaphysics, Our country is built on a set of values derived from ancient civilizations, individuals, and city-states; both negative and positive attributes of these relics can be proven to have assisted in molding our government into a unique and prized entity. Never would one imagine that western civilization is actually inclined by theories of truth and the human beings perception of it. Few would have thought that a primitive concept could be linked to the setbacks of other societies and their forms of socialization, as well as to the success to ours. The basic concept of truth and our natural response to socialization developed an ideal image of our current day country, long before our country existed. In ancient Greece, a great philosopher named Plato founded one of the most famous schools in all of history. Plato was a student of an enlightened man and a teacher of many others. Plato’s contribution to our existing government is given little credit, yet thanks to him we function as o ne of the most sophisticated societies in the entire history and the world. Plato, whose real name was Aristocles, was believed to have been born the year 427 BCE in Athens, Greece. He was born into a wealthy, Athenian aristocratic family, who actually came to rule Athens in 404 BCE. Because of his family’s prosperous background, Plato was treated to fine education. Plato’s upbringing ultimately influenced his viewpoints on particular subjects pertaining to philosophy and politics, a majority of his thoughts were pulled from two chief occurrences in his life; the Spartans victory over Athens in the Peloponnesian War, and the teachings, as well as the execution, of Socrates. The Peloponnesian War began before Plato’s birth, yet didn’t end until he was abo... ...Web. 25 Nov. 2013. . Patten, Joseph, and Kevin Dooley. "Ancient Political Theory." Why Politics Matters: An Introduction to Political Science. Belmont, CA: Wadsworth Co, 2011. 35-47. Print. "Politics." Merriam-Webster. Merriam-Webster, n.d. Web. 02 Dec. 2013. . "Thomas R. Martin, An Overview of Classical Greek History from Mycenae to Alexander." Thomas R. Martin, An Overview of Classical Greek History from Mycenae to Alexander,New Directions in Philosophy and Education, Plato's Academy. The Annenberg CPB/Project, n.d. Web. 27 Nov. 2013. . Thornton, Bruce S. Greek Ways: How the Greeks Created Western Civilization. San Francisco: Encounter, 2000. Print.

To What Extent Were Hitler and Stalin Similar?

To what extent were Hitler and Stalin similar? Hitler and Stalin were both cruel dictators around the time of WW2, but to what extent were these two men similar? Firstly they were both dictators throughout WW2; however they were both of different beliefs. Hitler was a fascist and Stalin was a communist, however they were both such extreme versions of these beliefs that they were, in many ways alike. Starting with childhood, Adolf Hitler was born on April 20th 1889 in a small Austrian town called Braunau, near to the German border.His father, Alois Hitler was an abusive drunk similar to Stalin’s father, Besarion Vanovis Jughashvili. This evidence suggests that perhaps the bad relationships these men had with their fathers, who made very poor role models, may have had some contribution to the turnout of these dictators. Stalin did not graduate, unlike Hitler; instead he devoted his time to the revolutionary crusade against the Russian monarchy. He spent 15 years as an activist, who was arrested on a number of occasions and exiled six times in total.In 1913 Stalin was captured for the sixth time, and was exiled to a region in Siberia near to the Arctic Circle called Turukhansk. He was then released for a final time in March, 1917, by Alexander Kerensky’s revolution. When you compare Hitler’s life before dictatorship it is obvious that this portion of the men’s life was extensively different. Stalin rose to power as general secretary covertly, into one of the most dominant communist parties at the time. And when revolution leader Vladimir Lenin died in 1924, control was thought by the Russian public, to belong to Leon Trotsky who was the head of the red army.However Stalin rose to power instead and, although he incorporated fear into his tactics of leadership, like Hitler did, his actual claim of control over Russia was visibly dissimilar. Hitler’s early adulthood was difficult, after leaving his school in Vienna he was devastated by the loss of his mother to cancer. Shortly after which he was struck by another heavy blow, as he was rejected from art school and forced to give up his dream of becoming an artist.He was now very poor and living in a doss house with the homeless, it was at this time many historians believe he developed his hatred of Jews as they were generally well-off people thriving in a time when he had nothing, this hatred would later play a major part in the mass genocide he lead during his dictatorship. When Hitler rose to power in 1933 Germany was facing a crisis, the great depression had struck, and America had stopped funding them or buying their goods, causing 6 million people to lose their jobs, on top of that the restrictions Germany had already suffered due to the treaty of Versailles were catastrophic.So, the public began to question their current democratic leadership. For Hitler turning the public against democracy and communism was easy, they already doubted the democratic leade rship and since the communist uprisings between 1919 and 1920 that had caused a major panic and the horror stories from Russia and Stalin, people already disliked the communists greatly. He used the similar beliefs between himself and the people to strengthen their relationship and allow them to worship him. Similarly, when Stalin came into power he influenced the people to turn them against his opposition by pointing out their similarities.Stalin was a man of the people, a peasant who had fought in the revolution, and was in the public eye having attended and given the main speech at Vladimir Lenin’s funeral. However, his opposition Leon Trotsky was a Jewish Army leader who did not attend Lenin’s funeral (however sources tell that Stalin tricked Trotsky into not going). This was similar to Hitler because they both focused on what they had in common with the public , and ensured they kept themselves in the public eye as the hero when in actual fact they turned out to b e the villains.Another likeness between the two leaders was their use of terror to control their country. Both of the dictators enforced the secret police, who were one of the biggest fears of both countries public, in Russia the secret police were called ‘Cheka’ and in Germany they were known as Gestapo. The secret police were the secret force put together by the government to spy on and capture those who spoke out against them, in Hitler’s case for example the Jews. Once captured by the secret police the prisoners would either be executed or taken away to concentration camps, gulags or ghettos to be tortured and forced to work manual labour.Both men additionally, believed in using children to spy on their parents, in many schools across Germany and Russia the dictator’s beliefs were broadcasted to young children, they were taught to snitch on their parents if they spoke out against the government. When using propaganda Hitler was linked to Stalin through their use of twisting the public’s mind. Many historical sources depict images of Hitler or images of Stalin hugging women and children and leading the army, in addition to this almost all of their osters depicted their political parties symbol, which with Nazis symbol (swastika)ironically meant good fortune and peace. A major difference was that Stalin’s posters were much more general, much more of Stalin loving the public whereas Hitler’s posters clearly defined his policies. For instance Nazi propaganda was widely images of the Hitler youth army, the Aryan race (the race Hitler believed to be superior to all others- blonde hair/blue eyes) and many images of ugly Jewish people perhaps eating German babies.Often when observing Hitler and Stalin people overlook the changes they made for the good. In Hitler’s case he promised policies such as Lebensraum (the need for living space) -the reclaiming of land lost in the treaty of Versailles and, he promised t o increase the army size from 100,000 to 1,400,000. He also came up with the Hitler youth army providing leisure events such as holidays, trips and sports events, moreover he gave the Germans cheaper cinema and theatre tickets and provided them with better meals.He greatly improved the quality of German working facilities, as well as providing loans to married couples, and encouraging the birth of children by saying that the more children you had the less you had to pay back form the loans. Overall the main thing he provided to the poor Germans who had lost so much since WW1. Stalin gave the public hope for triumph for over the cruel grip of fascism taking the current revolution a step further. He made his country a world power alongside the USA, not like Hitler who made Germany suffer a colossal loss after WW2.He greatly improved Russian industries and economy, the farming in Russia increased by 200 %. Additionally Stalin increased by decades the life expectancy of many Russians, h e also enriched the lives of many Russians who lost faith especially throughout WW2. Furthermore, during Stalin’s rule he significantly enhanced the standard of women’s rights by allowing them to receive education and employment and permitting them to give birth in hospitals with prenatal care. Opposing Hitler immensely, who sacked hundreds of women believing their purpose was to stay at home with the children, and cook and clean.On June 22nd, 1941 Hitler, feeling himself losing the war and growing paranoid of Stalin’s communist power invaded Russia calling it Operation Barbarossa. It was a foolish decision which lost him a large portion of his army, and the war essentially. Stalin triumphed and by mid-April of 1945, Soviet forces had pushed their way into Berlin, and Hitler and his wife Eva killed themselves in order to escape the terrible punishments of losing the war. Stalin died later on in 1953 on March 5th, 1953 a stroke.In conclusion although they were bo th at the furthest ends of right wing communism (Stalin) and fascism (Hitler), they were indeed so extreme, that in a way, they were a like. There methods of control, torture and advertisement were so remarkably alike and, their mass genocides will go down as two of the most dreadful, but painfully similar events in history. So to a certain extent I do agree that these dictators were very similar from a particularly young age, though at many significant points in their lives they did show great dissimilarities.

Fostering Teacher Student Relationship in Nursing Essay

The teacher student relationship is very important for children. Children spend approximately 5 to 7 hours a day with a teacher . We ask ourselves what is considered a good teacher? All of us have gone through schooling, and if fortunate had a favorite teacher. A positive relationship between the student and the teacher is difficult to establish, but can be found for both individuals. The qualities for a positive relationship can vary to set a learning experience approachable and inviting the students to learn. A teacher and student who have the qualities of good communications, respect in a classroom, and show interest in teaching from the point of view of the teacher and learning from a student will establish a positive relationship in the classroom. I will be focusing on the relationship between a nursing student and teacher, involving a setting of classroom and at the clinical settings which I have found to be extremely important for the student to gain a positive attitude towards their profession for the rest of life. Each student has different strategies for learning and achieving their goals. A few students in a classroom will grasp and learn quickly, but at the same time there will be those who have to be repeatedly taught using different techniques to be able to understand the lesson. Also, there will be students who roam around and use college as entertainment. They won’t like our instructions or policies. Teaching then becomes difficult, especially if there is no proper communication. Like wise the student disruptions may occur in classes that are poorly organized and managed where students are not provided with appropriate and interesting instructional tasks. The main thing teacher can do is continuously monitor the student in order for him or her to be aware of any difficulties that he/ she is having. Understanding the child’s problem, fear, or confusion will give the teacher a better understanding about the child’s learning difficulties. Once the teacher becomes aware of the problems, he or she will have more patience with the student, thus making the child feel secure or less confused when learning is taking place in the classroom. The same thing happens in clinics also. The students may face many problems in their clinical areas. Many of the students expressed the despair of having a wide practice-theory gap. Eventhough nursing students are learning many subjects in deep; they may be feeling that they can’t practice it all in the actual practice. They may be feeling that they are doing the very basic nursing care that even the nursing aids can do. In my student life I was sometimes observing the evaluative role of teacher, instead of teaching role. So teachers can avoid creating such situations by making the clinics a best teaching arena. A teacher who acts as a good facilitator or supporter at the clinical setting can easily enter in to the minds of young students and this will enhance the development of a hearty relation between these two parties. The student is also responsible for making the communication a positive one. They can approach the teacher for open their mind during their academic or personal crises situations. Of course a teacher is not going to understand every problem for every child in his or her classroom, but will acquire enough information for those students who are struggling with specific tasks. A significant body of research indicates that â€Å"academic achievement and student behavior are influenced by the quality of the teacher and student relationship† (Jones 95). The more the teacher connects or communicates with his or her students, the more likely they will be able to help students learn at a high level and accomplish quickly. Those teachers, who demonstrate respect towards their students, automatically win favor by having active learners in their classroom. The arrogant or offensive teacher will lack these positive qualities due to his or her lack of control over the children. Teachers should assert that they should also be treated with respect . Teachers can blend their warmth and firmness towards the students in their classroom, but with realistic limits. Teachers who are in a classroom might have experienced one time or other students who are disruptive or find learning boring. Teachers understand that if this behavior continues in the classroom and if they do nothing to prevent this from happening, the outcome proves to be disastrous for both types of participants. The student will conclude that his or her behavior is permissible, and will draw away from learning; therefore it is essentially important for the teacher to explain to the child the importance to learn. Though we understand that learning cannot be forced, learning becomes a process for an individual where he or she feels comfortable with learning whether it’s in a classroom or at clinics. Children in first year feel the urge to talk about their problems, fears, or even show their knowledge, but at the same time they want to be listened too. The student will feel valued and respected. Students feel happy when the teacher eventually gives them the option of contributing, or in other words the teacher asks for an opinion, which is usually not offered to the students. The teacher does not have to give up all their control, rather teachers share control with students and encourage interactions that are determined by mutual agreement. A close, but limited relationship between the student and teacher can be helpful for those students who are shy, and find speaking in front of the classroom difficult or children who have low self-esteem. The tension of these students will prevent them to develop the confidence they had always wanted, but never achieved due to not having a good relationship with the teacher. Therefore, how does a teacher hold a relationship that leads to effectively teach the children? The answer becomes clear when teachers interact with, and learn more about their students. Our first educational experience, which takes place in the primary years of our life, sets the principles for our future education. Having established a positive relationship with students will encourage students to seek education and be enthusiastic and to be in school. Remembering our favorite teacher will be recognized because they had at least in one way or another the qualities I discussed in this writing although we are not aware of it during the time we are in school, but teachers are well recognized at a later time of our lives.

Representation of Gender in the Film The Crucible Essay

Nicolas Hytner has used a number of techniques such as camera angles, dialogue and music to represent gender through the film version of Arthur Miller’s The Crucible. This is evident through the study of the characters John Proctor, Reverend Hale, Judge Danforth, Elizabeth Proctor and Abigail Williams. The film is set in the mid 17th century in the Puritan society of Salem. The Puritans are a group of people who take the Bible literally and very seriously. Law and religion was tied together so that sin became crime and visa versa. Salem was a place where pleasure and relaxation of any sort was restricted and people lived under rigid Puritan constraints that allowed no room for privacy. All power within the society was derived from biblical authority and the patriarchal views of Salem, thus the society was led by ministers of religion and the patriarchs, with women as the third class citizen. Miller, reflecting his own 1953 context, is paralleling the Salem witch-hunt with the infamous drive by Senator Joseph McCarthy to expose ‘radicals’ and ‘communists’ in the USA. Clearly, the term â€Å"witch hunt† has come to mean the slandering of innocent people using them as scapegoats for the things that are wrong in society. Discrimination against Muslims during the recent Gulf War and War on Terrorism illustrates the universality of the issue of witch-hunting. With the context in mind, the representation of gender in Salem can be analysed. The tragic hero of the film, John Proctor, is presented as a stereotypical man of the late 1600s Salem. John is presented by Hytner as very much the moral centre of the film through the use of a variety of filmic techniques in the construction of his character. In the first scene he appears, his clothes are natural and earthy in colour and his movement while reaping is close to the natural rhythms of the earth. This paints a picture of Proctor as a handsome masculine man, a worthy farmer doing an honest day’s work. The rhythmic reaping of the field gives a comforting feel and shows John’s confidence with his tools – a man used to hard work. The sunlight reflects off his face bathing him in some spiritual power. His  children are out working with him giving the impression of a family man. Images of Proctor are also painted in the scene in Proctor’s household and both male and female roles in the home and family are juxtaposed. John as the head of the family is blunt and abrupt to his wife which was representative of family life at the time. John is master of his house and shows his power when he shouts the word â€Å"Woman!† at Elizabeth. The single word establishes that John’s status is higher than that of Elizabeth and she must submit to his will. Proctor’s dominance is shown in the repetition of the words â€Å"I’ll think on it† and his slamming down on the table signifies the end of their argument. His male qualities are shown in the way he uses his body to make a point and his physical supremacy over his wife. Juxtaposed to this is the representation of female gender through Elizabeth’s character. She is constructed as a rather cold, but highly moral woman. Elizabeth’s role in the home is to care for the house so John can relax whilst she waits on him. This is shown by how she begins to clean up the table as dialogue is established and how she serves John and does the dishes while he is comfortably seated. Thus her inferior status in this patriarchal society is established. The scene portrays the female gender as quiet, submissive and subservient, and a protector of the home from outer influences as we learn that she â€Å"sent Abigail on the roads† because of her sexual attraction to John. Elizabeth is a fine example of the women in Salem. She is stoic, in keeping with the cultural expectations where any show of emotion is considered unseemly. She demonstrates the reserve that, as a woman, she has practiced all her life. This gender role is celebrated throughout the film. She is resigned, willing to accept the laws of her society however unjust which can be seen in the scene when she is arrested. Endowed as the home maker and nurturer, socially expected roles, her meek submissiveness highlights her strength of character as a wife and a mother. This is done through the close up of her hugging her children before she is taken away. The film lauds her behaviour in this scene as quietly dignified, and her integrity is highlighted when she organises the care of her children and comforts them  and hopes her husband will bring her home soon. Essentially, Joan Allen’s acting accounts for much of Elizabeth’s dignity, for the actress stands upright and faces her ordeal with confidence. Hence, the actions of an actor compliment the other filmic techniques that represent gender roles in the film. Despite his patriarchal prerogatives in the household, Proctor’s status is eclipsed by the status of those involved with the theocracy, such as Reverend John Hale and Judge Thomas Danforth. Reverend Hale is portrayed in the traditional stereotype as a gentleman of intellect and authority. He acquires this authority through his unique knowledge of ‘the invisible world’. This can be seen in the scene when Hale interrogates the girls. His demeanour and dress linked with his patronising voice threaten the powerless girls, and establish his authority as a feared ‘expert’. The tilted camera angle looking up at Hale and down at the girls reinforces this power. Judge Danforth represents another form of biblical power in the patriarchal society of Salem. He is the enforcer of law, one with absolute power over the individual, one who holds power over life and death. In the scene of his arrival, his importance and power is signified by the music with an insistent drum beat that is very loud. The camera angle looks up at the entourage showing soldier, carriages and horses charging into Salem to take control. The crescendo of music stops with a gong like sound as Danforth steps out of his carriage in medium close up with an upward camera angle. He is dressed very formally in black with a gold buckle standing out on his hat and stands in an upright and confident stance. These factors combine to establish Danforth as the stereotypical judge – an aged man endowed with wisdom and knowledge, but nonetheless with a hint of stubbornness. Contrasting to all this is the representation of female gender. Women in the society possess barely any power at all, not even the right of freedom of expression. This is why they were dancing in the woods and ultimately triggering the whole episode of the witch hunt. It is no wonder why a girl like Abigail would seize her chance to enjoy her powers as â€Å"God’s fingers†. However this empowerment of Abigail, her unnaturally strong sexual  attraction and her unwilling to be a submissive maid/housewife all works against social expectations of Salem and the film’s stance on being male and female – this establishes Abigail as evil and dangerous. Apart from being represented as countering stereotypical qualities, she is also established as a manipulative whore. This could be seen in the scene where John and Abigail meet against the wall. Dialogue is used to represent Abigail as a seductress, â€Å"give me a sweet word John†. Music accompanies Abigail’s emotional state, simple, unmelodic and mysterious as Abigail tries to seduce John and becoming more melodic and threatening as Abigail grabs John’s crotch and harangues him to position Abigail as a more powerful figure. As Abigail and John start to argue, Abigail occupies the foreground and the centre of the frame. This framing positions her as an empowered female. All this contributes the film’s construction of Abigail as a resistant and countering role and a temptress. In conclusion, Miller has used various filmic techniques to construct and represent gender roles as pointed out above.